1 Micron Jumbo Pleated Sediment Filter - BC10P1
Jumbo Pleated Filter to fit inside BH10W Whole House Filtration Housing
_logo.svg.png){kind=logo}
Easy to install and use
Filter Type - Pleated - 10" x 4.5"
Fits in - BH10W Jumbo Housing Unit
Removes - Dirt, Sand, Sediment, Rust
Micron Rating - 1 Micron
Flow Rate - 18L/min
Min/Max Temperature - 4 - 50
Min/Max Pressure - 60psi
Micron Rating - 5 Micron
Capacity - 40,000L
Recommended Service Life - 6 Months
Can be run alone or in line with other jumbo housing/cartridges.
Basic Install Instructions for BH10W which is the housing for the BC10 range.
- see instruction manual for more details
1. Prepare:
Turn off the main water supply & open a tap to release pressure.
2. Plan and Position:
Find a good spot near the main water line leading into your house & make sure there's room for
the unit and future maintenance.
3. Cut and Connect:
Measure and cut the water pipe, use plumbers tape on all threads, then connect fittings carefully.
4. Mount:
Securely attach the unit to the wall. Keep it level and aligned with the pipe.
5. Install Filter:
Follow the instructions on the previous page to correctly install the filter.
6. Connect Pipes:
Attach the cut pipe to the unit's inlet and outlet. Check for leaks and tighten if needed.
7. Test and Flush:
Turn on the main water supply. Check for leaks and flush out any air and debris.
8. Final Check:
Look for leaks and fix if any. Make sure the unit works properly.
The Sapphire Jumbo Housing Kit is designed for cold water use only and can body a range of compatible cartridges : BC10P/BC10P1/BC10P10/BC10P20/BC10R/BC10C/BC10C1.
Compatible products
Discover related products and replacement parts. We have full parts available, contact us for more.
